You can get the controller board in/out without removing the PSU
Wow
My last Creation !
A Supergun : The COREGUN!!
Last edited by rax; 10-15-2012 at 05:45 PM.
The last one :
HI Saturn Navi Switchless Mod + RGB Mod
A nex one :
More than 15h of play with battery.
A backlight from a NDSi also works well and gives even light, no bright spots.
Any chance you could upload a picture of the inside of your MVS into AES shell?
Nice. But it need to found a junk ndsi, more expensive than leds.Originally Posted by omp
Sorry I don't have any picture of the inside. I sell mine when I have received my Naomi Cabinet.
Oh, so how did you hold the controller ports?
I saw a guy using acrylic for those. I made mine with iron and used screws from under the case to hold it.
Soldered with oxygen two bolts to hold the screws but I don't feel comfortable enough with the final result.
I use PCB to fix the controller ports with the MV-1C. This is very tricky, and also the very boring part of this mod.
New Dreamcast Full Mod Version
Very nice! I always thought the hardest part about the DC VGA mod was having to put it back together, but having the ports along the bottom like that gets round the problem nicely. What port are you using on the back of the Dreamcast? Looks like USB, but that doesn't have enough pins for video and audio...
Last edited by Marmotta; 04-13-2013 at 06:43 PM.
Faceplam. I never realised USB3 had 9 pins.
3.0 yes
got 9 pins + shield
every thing needed to have video + audio + vga mod console activated when cable is connected
That 3.0 connector is pretty genius, especially since it's slimmer than a VGA port thus saving space. I'm thinking about doing that instead of doing it the usual way now.
The result is so much cleaner than with vga port + swith vga / av port
So that last pin connects the circuit needed to put the Dreamcast into VGA mode? Very nice.
That's it
Posting Permissions
Reply With Quote
Bookmarks