Is it possible to perform a 60hz mod on a PAL Turbografx? Or its stuck at 50hz forever
Thanks ^-^
Is it possible to perform a 60hz mod on a PAL Turbografx? Or its stuck at 50hz forever
Thanks ^-^
This might help...
http://nfggames.com/forum2/index.php?topic=1306.0
Hmmm I cant see anywhere where it says if anyone managed to do a 60hz mod :(
It does mention it, through some broken english: http://nfggames.com/forum2/index.php...sg8613#msg8613Originally Posted by Everblue
As far as I understand, you need to replace the 17.73MHz clock crystal with a 21.47MHz clock crystal in order to switch it to 60Hz.
Then, once you've done that you need to follow this guide: http://www.mmmonkey.co.uk/console/pce/rgb.htm to tap RGB off. You may also have to amplify the signal using this guide: http://www.mmmonkey.co.uk/console/pce/amp.htm
Ah thats great thanks - any idea where can I get such a clock crystal to replace?
Last edited by Everblue; 08-02-2012 at 02:30 AM.
A broken NTSC TG16 or PCE. You can often find broken consoles on ebay for next to nothing. Also, I believe the SNES uses a 21.47MHz clock as well.
Oh. Alright, thanks!
This typically happens when the frequency is increased to 60Hz, but the color coding in the composite signal still has its PAL properties.Originally Posted by chaoticjellyI have acquired a PAL Turbografx.
Opening it reveals the same insides as the pictures above, I replaced the crystal with one of correct frequency for 60hz - I receive a black and white (NTSC?) picture over composite video.
I RGB modded the PAL Turbografx and I receive a colour picture over RGB.
Some television sets (Sony trinitron) are capable to recognise the PAL color coding, while operating on 60Hz and then RGB is not needed to display a color picture (although in lower quality ofcourse).
You can get them from electronics suppliers like Mouser too, no need to scavenge busted consoles.
That depends on how accurate it needs to be. For example, Mouser only has a 21.4 MHz osc, not 21.47 MHz. If it's "close enough" then you can get it from Mouser. If it has to be exact, you can't.
You sure about that? I found this on Mouser: http://tinyurl.com/8ozxduk
Very interesting... so I can replace the crystal with that one? Also, how hard is it to replace it? Thanks!
I was looking at oscillators... that's a crystal. Does the TG16 need a crystal or a clock? If it needs a clock, you'd need a few gates and passive devices to go with that crystal to make a clock cirucit.
http://www.otakus-store.com
Those guys there are modding PAL consoles to 60hz.... I wonder how they do it? I'd try them out but the site is in French (I sent them an email but I don't know if they are France only)
It's mainly useful for owners of TVs that accept PAL 60, yet neither RGB or NTSC 60. Otherwise may as well start from a US Turbografx.
I was mostly interested because you can get PAL brand new PC ENgines for cheap.
Posting Permissions
Reply With Quote
Bookmarks