WTB: Playstation 1 Kiosk Parts
I have a Playstation 1 kiosk that looks exactly like this:
I am looking for what is below
However, I do not have the controller mounts which attach the PS1 controllers to the kiosk itself:
I also do not have the graphic inserts above and below each speaker:
And the last thing I am missing is the circular 'compatibility guide' pamphlet that hangs from the kiosk:
If anyone has any of these...Please PM me.
Update: I am also looking for the brackets that held the Playstation console down to the kiosk(so it doesn't slide around)
Last edited by skateforjondoe; 06-08-2012 at 07:07 PM.
OMG I wish I had a kiosk like that myself. I remember seeing these everywhere. I would like one too...
I know all the ones in Australia got thrown out into the dump. I think I remember seeing one in the back room of the games wizards (defunct) all dusty and damaged. As for the consoles, I dont know...
Kiosk PS1: http://www.ebay.com.au/itm/Sony-Play...#ht_500wt_1195
What I first believed was that the external cable with the ATX header was for the Left and Right channel audio to the speaker below (which looks like a sub). I would say it was probably for the left and right speaker, but then again there is no grounding pin in which the red must be.
Seeming as though the red label (as described from ASSEMblers video) gives a warning that the PS1 will not work when removed, is it is connected as a power bridge to complete the power circuit, or it is providing one of the voltage ranges. It would be very interesting to know exactly what it would be doing, so I ask you ASSEMbler to open it up for me :)
ASSEMbler would have to talk over me on this one ;)
Last edited by H360; 06-04-2012 at 04:12 PM.
It's for the reset button on the kiosk.
I am the seller of that kiosk model PS1. If you have questions ask.
It works 100% without anything plugged into it, the wires are hooked to the reset switch.
So the red label is a dummy. It does nothing when removed.
And the reset is there so that users can reset a frozen game im guessing...
Reminds me when I kept seeing RRoD 360's in their kiosks xD
I see you've found my pictures :P I should really document my other kiosks too...
I will keep my eyes open for you, sadly I used to have a spare PS1 kiosk that had the controller holders still on it but I sold it :(
While it's not ideal, you could try something like what's done in this Pepsi kiosk on ebay: http://www.ebay.com/itm/Pepsi-Playst...item5d33ca69cb
Check out the second picture. That's not how they shipped obviously but it wouldn't take much more than 2 of the right strips of metal and some velcro to keep it looking at least a bit more professional.
As for the inserts while I have them they are pretty faded...you're honestly best off printing some of your own. I can get a picture that's more close up if you'd like with approximate dimensions. The compatibility wheel hover I can't really scan in without ripping it apart. If there's anything I can otherwise do that will help you, let me know.
Last edited by sparksterz; 06-08-2012 at 03:37 PM.
@sparksterz Do you have the brackets that held the playstation console down to the kiosk?
Yes I do, if you're interested in them I can get you the shipping cost for the envelope and shipping sent to you.
Originally Posted by skateforjondoe