Page 2 of 8 FirstFirst 12345678 LastLast
Results 21 to 40 of 160

Thread: EverDrive 64 v2

  1. #21
    Quote Originally Posted by gray.fullbuster View Post
    So your saying you solder in surface mount components on your own? As an inexperienced console modder may I ask where or how did you learn to solder?
    It's not as bad as it looks. At those densities you don't worry about individual pins or bridges anymore, you just use lots and lots and lots of flux, draw the iron in a straight line over all the pins, and wick up any bridges.

  2. #22
    You have the MAX II set up as a device programmer for the FPGA? Or dedicated configuration device? I can't tell if that's what the small chip next to the SD slot is or not.
    Last edited by exdeath; 11-23-2011 at 03:36 PM.

  3. #23
    Member Elite
    KRIKzz's Avatar

    Join Date
    Apr 2010
    Location
    Ukraine
    Posts
    1,671
    max2 helps to load bios, then bios code load firmware from sd card and send to fpga via max2. so max2 is multi purpose
    I looking for genesis 2 with motherboard VA2

  4. #24
    Conscript
    kaput's Avatar

    Join Date
    Sep 2011
    Location
    Sweden
    Posts
    75
    Quote Originally Posted by exdeath View Post
    It's not as bad as it looks. At those densities you don't worry about individual pins or bridges anymore, you just use lots and lots and lots of flux, draw the iron in a straight line over all the pins, and wick up any bridges.

    Yeah. And once you get some experience and learn exactly how much solder to use, there won't even be a lot of bridges to wick up :)

  5. #25
    Combat Soldier
    C-Kronos's Avatar

    Join Date
    Mar 2009
    Location
    Depends on my hobbies and occupation.
    Posts
    594
    Just as a note, the 64drive does not have the same issue with 6103 CIC games when using the 6105 CIC. I have a 6105 in my 64drive, and just tested some 6103 games, worked perfectly.
    I come off as an arrogant jerk sometimes, feel free to bring me back down to level when that happens; however, it's not intentional most of the time.
    --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    Consoles: Sega Genesis | Nintendo 64 | Nintendo Gamecube | Nintendo DS Lite | Nintendo 3DS | Nintendo Wii | Sony PSP | Sony PS2 | Sony PS3 | Microsoft Xbox | Microsoft Xbox 360
    --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  6. #26
    Neo Myth 64 doesn't have this problem either because I have a 6105 soldered into mine.
    So most likely it's just a small bug in krikzz boot emulator that he will fix very soon.

  7. #27
    Member Elite
    KRIKzz's Avatar

    Join Date
    Apr 2010
    Location
    Ukraine
    Posts
    1,671
    one guy tested 1080 Snowboarding on myth 64 with 6105 and he say that game does not work. may be he used some old menu or something like that. but anyway, if it work somewhere, then i just should to fix boot emulator code
    I looking for genesis 2 with motherboard VA2

  8. #28
    I just tried it for you, so you can be sure =)
    Both the PAL and NTSC rom of 1080 work on my jpn N64 with the N64 Myth and 6105 cic (from Perfect Dark US)

    Did you try the Everdrive 64 with a 6105 or 7105? Maybe there is a difference, I can't test it on my Myth because I soldered the 6105 in it :(

  9. #29
    Member Elite
    KRIKzz's Avatar

    Join Date
    Apr 2010
    Location
    Ukraine
    Posts
    1,671
    i try only 6105
    I looking for genesis 2 with motherboard VA2

  10. #30
    Hello KRIKzz will you also support the Everdrive 64 V1 in future with OS & FW Updates?

  11. #31
    So all games work on the everdrive 64 v2 except for Banjo. And you really need to get a manufacturer. I have 200$ in my account via paypal ready to give to you.... BUT YOUR OUT OF STOCK!!!

  12. #32
    Quote Originally Posted by Alex_1985 View Post
    Hello KRIKzz will you also support the Everdrive 64 V1 in future with OS & FW Updates?
    Yes he will. I actually just asked him this yesterday. OS files that work on v1 actually have FW for v2 built in, v1 just ignores it since it can't load it during start-up. Only difference is for FW updates on v1 you will have to get updated or use a USB Blaster.

  13. #33
    Quote Originally Posted by Tagzard View Post
    So all games work on the everdrive 64 v2 except for Banjo. And you really need to get a manufacturer. I have 200$ in my account via paypal ready to give to you.... BUT YOUR OUT OF STOCK!!!
    Actually he has been pumping out a lot of EverDrives lately now that he has more people helping him make them. He used to be only able to send me 5 or so at a time, now I am getting 20+ at a time.

  14. #34
    Should I go see a doctor because even though I already have a Neo N64 Myth AND a 64Drive I still wanna have the Everdrive 64 too xD

    And to answer Tagzard's post:
    V1 can play all games, but not Banjo Tooie because it has a special copy protection that hasn't been cracked yet.
    V2 can play all games but for Banjo Tooie you need an actual 6105 cic installed in the Everdrive and not the standard 6102 because Banjo Tooie checks for the 6105 several times even after the boot.
    Also right now, when you have the 6105 cic installed, games like 1080°, that need the bootemulator to emulate a 6103 cic, won't work.
    But I'm sure Krikzz will find the solution for this in the future.

    Also as StoneAgeGamer already pointed out, the big improvement of V2 is that you don't need to buy anything extra to update it.

  15. #35
    Member Elite
    KRIKzz's Avatar

    Join Date
    Apr 2010
    Location
    Ukraine
    Posts
    1,671
    banjo, and some game, which req realtime clock (can't remember name) is the only known problems
    I looking for genesis 2 with motherboard VA2

  16. #36
    Quote Originally Posted by KRIKzz View Post
    banjo, and some game, which req realtime clock (can't remember name) is the only known problems
    Animal Forest (Nintendo 64 animal crossing) is one of them. I'm pretty sure there are a few others, but I don't have a clue what they're titled.

  17. #37
    is banjo a rare (lol) game ?
    i mean, very difficult to find, expensive, you have to kill a certain amount of little cat an offer their hearts to someone in order to get a poor, loose, dirty copy of the game?

    really cant get the point around all this hassle

  18. #38
    Actually Banjo Tooie is very easy to find and only costs about 20€ shipped. It's just the "gotta catch 'em all" ^^

  19. #39
    Member Elite
    KRIKzz's Avatar

    Join Date
    Apr 2010
    Location
    Ukraine
    Posts
    1,671
    mooooore speeed for ed64 http://www.youtube.com/watch?v=DMVTfCumrHA
    i believe that it is not a limit (:
    Last edited by KRIKzz; 11-25-2011 at 12:56 PM.
    I looking for genesis 2 with motherboard VA2

  20. #40
    Hello, I've seen in the video that you are using Os version 1.14 and firmware version 2.20
    where can i download these?
    In your webpage latest version are 1.13 and 1.15 respectively

Page 2 of 8 FirstFirst 12345678 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •