GSPro utils any win9x OS should work I use Millenium, flash the cart with GSPro 3.2 rom.
GSPro utils any win9x OS should work I use Millenium, flash the cart with GSPro 3.2 rom.
Last edited by KH2K4; 06-08-2011 at 02:19 AM.
I'm not struggling (yet). The computer is not linked to the xplorer. Its like its dead.Originally Posted by danhans115
OK I will try that.
OK I did what you said (again)
PSEXE.COM for caetla version 2.15E (c)1997-99 K-Comm.
psexe.com -x printgpu.exe
WAITING FOR CONNECTION
Thats all it does. Times out (IE: it just waits until I press CTRL + C)
This was set on the BIOS mode 'ECP+EPP'. Also tried it on SPP...
WHAT IS GOING ON!!!!
I have spent a week of my time trying to get it to work re-installing Windows 98, ME, XP over and over!!!!!!
Leave caetla on the cart, otherwise stdio and pcdrv: fileserving cannot be used.
If that is what you tried, it wont work unless you set the environment variables in your autoexec.bat..
you need to tell psexe that you are using xlink/xplorer on LPT1.. did you try the commandline that I told you to earlier?
or in this case...PSEXE -P:10 DEMO.EXE
PSEXE -P:10 PRINTGPU.EXE
Last edited by danhans115; 06-08-2011 at 03:53 AM.
Who says that you have to use Windows to develop for the PlayStation?
I develop on NetBSD (when I do, recently I have done no PlayStation programming) with off the shelf stuff except for the modchip inside the PSX.
Last edited by tails92; 06-08-2011 at 04:18 AM.
I tried 'PSEXE -P:10 PRINTGPU.EXE'
All I get is...
PSEXE.COM for caetla version 2.15E (c)1997-99 K-Comm
... on the screen and nothing else.
I will try setting the BIOS from SPP to ECP etc and see what happens...
OK I tried all settings in the BIOS, cable is plugged in and everything should work.
Tried the code 'PSEXE -P:10 PRINTGPU.EXE' and it just sits there doing nothing while my Xplorer is frozen having to restart the PlayStation...
I'm lost and about to give up on this rubbish :DOH:
Should I go and re-install a fresh clean copy of Windows 98 one last time instead of Windows ME or try a different motherboard?
I am using an old mini-atx Gigabyte motherboard on an Intel Celeron - 128 MB RAM. Only has PCI slots...
I have a Aspire / Acer motherboard with a Pentium 1 and 64 MB RAM I can use...
I have 2 gigabyte standard-atx board's with 2x ISA slots, but I do not have a case big enough yet.
I then have a REALLY old mainboard with 6 ISA slots and is running a Socket 4 or whatever. Has only one port. Keyboard. Floppy and parallel, HDD etc must go off of an ISA card I have. Also has that tiny RAM with the old lock system - haha.
Last edited by H360; 06-08-2011 at 05:12 AM.
THhe OP was asking about what they used with the original ISA cards etc.. plus there are more tools available for windows.
I am setting fedora up on my spare computer at home to try out your SDK, as someone has kindly ported the newer version of catflap over so you can use an xplorer with it, saves on burning CD's.
Last edited by danhans115; 06-08-2011 at 05:08 AM.
Does the port definitely work properly, have you checked the cable you are using to connect the two?
I will try another cable right now. Wait 3 minutes for an update...
YOU LEGEND...
IT WORKS.
F*CKING CABLE. I ripped it in half... lol.
THANK YOU. The cable im using, is a cable from ~1980 that my dad used on the Amiga :D
Last edited by H360; 06-08-2011 at 05:31 AM.
Running on SPP mode in the BIOS on 0x378...
Also did some quick testing...
Xplorer SST 29EE020 - 256 KB
CAETLA 0.34
Download: 39 KB/s
Upload: 78 KB/s
Xplorer SST 29EE020 - 256 KB
Xplorer 2.009 (Xplorer Standard)
Download: (fast: 97 KB/s) (slow: 43: KB/s)
Upload: 147 KB/s
(03/03/1999 - RTC - English)
Also uploaded some .EXE's. Worked well and ran perfectly.
Thank you very much for all your help.
Glad it worked. Weird because the cable worked with my printer as an extension. I took images, and I will be posting them on my site soon.
Thanks again for your help and being so patient.
Last edited by H360; 06-08-2011 at 06:27 AM.
Reply With Quote
Bookmarks