I have 4 Dakota controllers, all which are missing the break away cords. I have tested with a normal break away and none of them work. Do I have 4 dead controllers or was there a special break away for them?
I have 4 Dakota controllers, all which are missing the break away cords. I have tested with a normal break away and none of them work. Do I have 4 dead controllers or was there a special break away for them?
Mine doesn't work on retail either.
Hmm,I wonder if they would work on a PC.
You can't convince a believer of anything; for their belief is not based on evidence, it's based on a deep seated need to believe.
Do as I say,not as I do. - your pal Yahweh
it's just usb but I wouldn't risk anything but a hub, let it roast the hub
Hmm, I was trying to use them on a dev kit- with no response. What do i need to make them work?
perhaps the pin out to the breakaway cable is different
Xbox Live - XxHennersXx
http://www.youtube.com/user/xxhennersxx
Or they are all blown and discards
I don't know. They all came with working dev kits. I guess will open one.
can you takes pics of the tear down?
how am i posting??
if you like or dislike the post concider giving me the appropriate reputation
:-)
Fried, different wiring for the breakaway cable, different wiring entirely, protocol differences, etc.
IIRC the XBox only recognizes so many "USB IDs" (I'm not familiar enough with the USB protocol to accurately say) as valid controllers. Given this is a prototype it might not have the same "hardware ID" as the Dukes or controller S does. In which case it might not recognize it as anything but an unknown USB device.
For example you can use regular USB memory sticks in the XBox as memory cards once formatted. However many, many, MANY chipsets used in those sticks are incompatible with the XBox producing some interesting results. The XBox can recognize most as USB mass storage devices but it can't properly mount them for whatever reason.
I wouldn't be surprised if it wasn't something this simple. What I'd try to do is to plug it into a computer's USB port and see if Windows recognizes it. If it does you should be able to get the hardware ID from device manager and see how it compares. On top of that you could try modding the .inf file for the drivers people have made to use XBox controllers on Windows with the hardware ID from this Dakota controller to see if the drivers will work with it.
If it does then you know it isn't dead.
http://www.assemblergames.com/forums...ad.php?t=31524
My feedback thread, since it seems somewhat difficult for people to find.
This sounds like a good idea to me. You can get an XBOX-USB adapter such as this one.Originally Posted by APE
http://www.vpgames.com/p-150-xbox-to...pad-on-pc.aspx
Popped one open and will take a few pictures before i put them back together. The ends of 3 of them seem fatter then the break away cables i have. Also the fourth is not a standard connector- its a 5 pin.
ALL XBOX controllers have five wires. In addition to standard USB wiring (Black/Red/White/Green) there is an Yellow wire which is supposed to contain the VSYNC signal for use with optical pointing devices (Yes, LIGHTGUNS) :thumbsup:
PlayStation Aficionado.
MSX Maniac.
Alright, here are some pictures,
Back of controller
Controller plugged into normal break-away
Front of board
The controllers all look the same minus the forth one with this five pin connection. I have no idea what i am to plug it into. All the others had normal connections.
Back of board with 5 pin
Back of board with the 5 pin plug again
Last edited by ProtonX; 06-14-2011 at 02:06 AM. Reason: More pictures
5 pins are normal for xbox, as already mentioned.
If you are going to connect to PC - ignore the extra wire.
Posting Permissions
Reply With Quote
Bookmarks