DTL-H2700 TRG SW

[Jackhead]

Hi,

i like to know how Sony use the "Trigger switch" on the backside of the H2700.
Its 3,5mm plug like for headphones.
Than i read this in the H700 thread about the install notes:

• Connection of board output to the D/A converter

TheH700/800 has toslink digital.
Is the TRG SW on the H2700 for the sound artist tool ???

I never seen this converter. Is it retail?
Also the other PSX devkits like the H2000 or H2500 dont has this analog input on the back.

Well i wonder if the H2700 is the only kit really using the Sound artist tool?
Or complete wrong, and this trigger connector is for other dev useage.
When i think back i never got connection to the h800. The MB found it but the Software cant find it.



The Sony manual says only "For Trigger Switch".

[unclejun]

It's for an on-off switch used to trigger the data capture.

[Jackhead]

OK.
What data was captured? For the performance analyser?

[smf]

OK.
What data was captured? For the performance analyser?

Well DTL-H2700 is performance analyser, pressing the switch turns logging on and off. I don't have the software so I've never seen what gets stored.

The software is pretty rare, even if the boards are not.

[unclejun]

The PA software is quite easy to find actually, it has been leaked a while ago.

[smf]

The PA software is quite easy to find actually, it has been leaked a while ago.

Maybe it was easy to find when you got it, maybe someone pointed you at it. However a google search doesn't show anything in the first page and that is what I class as easy.

If you can point me to where it's easy to find then that would be helpful thanks.

[Jackhead]

I just wunder why sony use switches for logging data. :confused:
The Sony Trigger switch:

[smf]

I just wunder why sony use switches for logging data. :confused:

Because of the large amount of data that is logged. If you enable logging when you get to a specific part of the game then both you and the computer have less data to deal with.

[HI_Ricky]

I just wunder why sony use switches for logging data. :confused:
The Sony Trigger switch:

because when you 2 hand busy useing joypad, you should use leg to click switches to capture log

[npt]

Jackhead,
The reason the 2000 and the 2500 do not have the foot switch input because only the dtl-2700 is three boards thick and has the PA board in it. The 2000 and the 2500 do *not* have the performance analyzer board in it, hence do not need a foot switch for start / stop of capture with PA.

BTW nice setup. I am about to come into a 2700 setup with a 2510 and everything, will post pics when I do... : )

Regards,

npt

:thumbsup:

[Jackhead]

Jackhead,
The reason the 2000 and the 2500 do not have the foot switch input because only the dtl-2700 is three boards thick and has the PA board in it. The 2000 and the 2500 do *not* have the performance analyzer board in it, hence do not need a foot switch for start / stop of capture with PA.

BTW nice setup. I am about to come into a 2700 setup with a 2510 and everything, will post pics when I do... : )

Regards,

npt

:thumbsup:

Yes true, i dont know before what the trigger switch used for.
Anyway the h2700 is cool, but i love the h2500 ;-).
Based on the case, the h2700 kills you all space for ISA PCBs.
The H2500 is pretty cool to use all sony dev boards (sound/graphic artist board) in one PC.
Useing h25bios is also very nice.