Switch-less may not work for everyone, as some models of the MD1 have the reset to trigger at logic high, not low, hence the clock pin isn't pulled low
Originally Posted by Jamtex
a nice 74hc14 between the reset pin and the 74hc74 would do the trick.
??? it's a T flip-flop, in this application it doesn't matter if reset polarity is high or low, all that matters is that at some point there's a low to high transition for it to toggle. Also if someone installed that mod how I suggested -- taking RESET from the CPU, it would ALWAYS be active-low since that doesn't change from 68K to 68K.