Sony PS2 TOOL DTL-T10k HJ + much accessory!!!

[Jackhead]

Hi mates,
i like to quit my PS2 Dev Items. I have no more use for it and i need the money.
I focused on PS1 Dev. I bought the follow Items here in the Forum from serious Members!
I sell it as described and i guarantee my declarations are correct!
You can check my feedback here in the Forum. I buy and sell some Items here before.
Maybe some Users can confirm im serious. Here my ebay Feedbacks http://myworld.ebay.de/bengale0711/ .

First let me say i dont use the Items. I only start it up to test the Main functions.
Lets start describe the PS2 Tool Unit NTSC/JP DTL-T10000 HJ.
The Tool is in good optical condition as you can see on the pictures.
Only an small crack on the side, i make you detailed pictures.
When the Item arrived at me i cleaned it up, and checked it inside with the TOOLGuide, all parts on the right place.
The Tool boots both sides up and shows no error message .
The Unit has two HDDs inside and Cards you see on the backside.
Unlikely the Controller/Pad Port on the Front is broken. Can fixed with very good Soldering skills and the right tools.
The DVD Drive has funktion but musst be fixed like you can see in the guide! I had no time to do this.
So i let it in the hands of the buyer to fix both problems. Maybe some experienced User can handle this.
I test it up with my Jap PS3 Power Cable and Stepdown Converter. But my Rev2 PS3 has an drive error and i sell it with the Cable. After that i have no chance to start the Tool up again for making more pictures.
Im located in Germany and its pretty hard to get an Japanese Power Cable here...
But the Unit stands after that in my living room and nothing happens with it.

Except this both Problems, the Unit works 100% perfect!
Include is the external HDD Drive DTL-H20400 . First time i only have the Case. I fit it up with an 40GB HDD but no data on it! Two Power Units include for UK and Jap.
Also include is the DTL-H10010 to connect it to the Tool or the Debugging Station!
Also i have the Full documentation for it (I think its complete, if not let me please know).
All Docus are in good condition, no marks or scrawling inside! Also an stack of more Infos on Din4 include.
Maybe you remember when the Unit sell here first time. You find it with working Pics some threads above. If you have now any questions, feel free to PM me or post it here!
I sell the Unit for the Same price i payed include shipping here! I think its an fair price.
I asked SOLD + shipping for complete items!
I organized for the unit an very safe paket!
Item will shiped safety as possible!!!
I shipped all the items WORLDWIDE!

Germany with DHL include insurance and Tracking for 13,90 €

Europe with DPD include insurance and Tracking between 40€ - 75€ dependent from you location (Ask for you location!)

Worldwide with DPD include insurance and Tracking (Airmail First Class) please ask for you location!

I Only ship with insurance!
Payments can make with PayPal or Bank transfer!
Thanks!

[Mugi]

You wrote that the DVD drive must be fixed.
what's wrong with it?

[Jackhead]

You wrote that the DVD drive must be fixed.
what's wrong with it?

First time i open the TOOL to check the Hardware, i see the DVD Drive has an little dented.
Its on the metal-plate side of the DVD-Drive. I think its the import damage from previous owner.
When you open the side case from Tool (where the DVD Drive is) it runs well.
But when the TOOL is closed the Drive has Problems to put the DVD after Drive close.
I think when you open the DVD Drive push the Dented back and clean it up its all right.
The Guide will be helpfull to do this. But so far the Drive open and close in both states.
So it musst be fixed! Because i dont open the DVD-Drive its only an idea from me.
Hope you understand i cant guarantee anything.
Thanks!

[Mugi]

hmmm, so it could be that only the case is damaged then.

the controller port damage is also kinda bad since it would be propably quite hard to obtain a spare part for it.

you're really putting me in a tight place here :P
i want this so badly, but it is damaged afterall, and buying this would mean that i'd have to sell my ps3 and propably my other ps2 too.

how much would be shipping to finland ?

[Jackhead]

Shipping to Finnland with DHL (insurance and Tracking) 55€
Tool is on ebay too. But for Assembler Users much cheaper!
I have some offers for it, so dont wait to long if you will take it.
Thanks!

[Mugi]

PM sent

[Dr.Wily]

sold or not ?

[Jackhead]

I sell it to the first one how can pay directly with no transfer time over paypal!
(Please only pay as gift, i dont wanne pay the PayPal transfer tax!!!Otherwise the buyer pay me the PayPal costs).
Items shipped next day after Payment. So please understand i dont can hold it, sorry.

Still for sale!

[Jackhead]

First Buyer cant pay directly... So Dr.Wily has the chance. Waiting for re.
Thanks

[port187]

I test it up with my Jap PS3 Power Cable and Stepdown Converter. But my Rev2 PS3 has an drive error and i sell it with the Cable. After that i have no chance to start the Tool up again for making more pictures.
Im located in Germany and its pretty hard to get an Japanese Power Cable here...

If I remember correctly you can use any PC power cable on the TOOL as its both 220 and 110v.
There should be a switch somewhere on the back/power unit where you can select the power input.

EDIT: after looking it up there is no 220/110 switch.. strange as I believe mine had one.
Not sure you should test it then without having it comfirmed.

[Jackhead]

You mean its inside? Dont see it. Sorry outside there is no switch like you can see on the Pic.
Every time i have japanese Units, there only useage with Step down converter. I dont test this with other voltage, the risk is to high :033:

[Mugi]

for that matter, isnt' the PSU of the tool just like in any pc ?

[oli_lar]

Jackhead is this the same one you bought off me I take it? Because I seem to remember it was 240v. Not 100% sure though. Parris might know

[Jackhead]

Jackhead is this the same one you bought off me I take it? Because I seem to remember it was 240v. Not 100% sure though. Parris might know

Yes mate, its your old TOOL ;-). I switch to PSX Dev. I run it with Stepdown 110V. But never test 220/240v.

[Jackhead]

SOLD to Mugi. Im happy to sell it back to this very nice Community. Thank you all! :thumbsup: