sega saturn model 1 mod chip

[ninjux]

well..i know that these mod chips are hard to find but...is there anyone out there who still has any for sale?or someone from you guys who might have a broken modded model 1 saturn?

thanks

[alphagamer]

if you are good with the soldering iron, try this!

http://www.angelfire.com/pa/Raluminat/model1.html

[ninjux]

if you are good with the soldering iron, try this!

http://www.angelfire.com/pa/Raluminat/model1.html

i did try that,but seems like the ribbon cable is short and its too difficult to keep the mod chip in place.if i remember correctly that was a problem,and somewhere they were selling longer ribbon cables..

[alphagamer]

http://www.consolegoods.co.uk/ sells ribbon cables, measure if they are longer than yours (they sell 7.2cm long ones)

[ninjux]

It says:NOT long enough for other purposes(it's just the one that connects the mod chip to the motherboard-not to the cd drive)
maybe if i find a ribbon connector(female-male) and extend to of these..

[alphagamer]

maybe its easiest to just buy a model 2 saturn ;-)

[TmEE]

if you are good with the soldering iron, try this!

http://www.angelfire.com/pa/Raluminat/model1.html

This is great :D

[ninjux]

i do have a modded model 2,but i want to mod my model 1 too!if anyone can help let me know

[retro]

Help in what way? Even if you find an original chip, you won't want to pay the price they go for!!

[ninjux]

if they are so expensive why did they stop their production?there are too many model one saturns out there,and most of them are in ebay.maybe that's why they only sell model one because they cannot mod them

[DC_Fan]

Definitely easier to find the chips for model 2.

[retro]

if they are so expensive why did they stop their production?there are too many model one saturns out there,and most of them are in ebay.maybe that's why they only sell model one because they cannot mod them

Is that not obvious? The 20 pin drive was used for a short time. They then switched to the 21 pin configuration and used it for ALL Saturns. It made much more sense to make mod chips for the current Saturns, as the vast majority of Saturns were (and still are) 21 pin.

Of course they can mod them! Why do you think Sega changed the configuration in the first place? Just like Sony, they don't want people modding their consoles and pirating their games, so make it hard for them to do so.

[raylyd]

i have modded a 20 pin saturn easy i dont know why some people are crying about the chips are easy to get hold of i know places just ask me and i can help and i have done a sanyo saturn

[DC_Fan]

i have modded a 20 pin saturn easy i dont know why some people are crying about the chips are easy to get hold of i know places just ask me and i can help and i have done a sanyo saturn

:crying::crying::crying::crying::crying::crying:

[dj898]

Sanyo board from memory was used in the model 2 type configuration~ no?

[raylyd]

i have two sega saturns one sanyo saturn model 2 and model one 20 pin saturn

[dj898]

Interesting~
Haven't seen the model one with the Sanyo board inside but then I haven't had much dealing with Saturn models other than JPN versions...

[sayin999]

Is the metal shielding short true? Cause I had a model 2 saturn I modded and I dropped it slightly on the table never worked again.

[raylyd]

yes its true

[ASSEMbler]

I can get them but I have to buy 100, and I don't know if I can sell that many, even at $12 a pop