richi902

Install PSBBN/HDD-OSD on other Region PS2 Consoles.(update 2)

Rating: 3 votes, 5.00 average.
38 Comments
by
richi902
, 03-11-2012 at 11:58 PM (12986 Views)
update:i have updated the guide with new instructions for the new "mbr installer tool"

note: NONE of the methods described here will work for a SCPH-10000 or SCPH-15000 PS2 Console.
but you will be able to use the harddrive in one of these 2 consoles, after you installed it on a SCPH-30000+ console, but you also need to have the memory card updated already installed. but keep in mind, online software like Final Fantasy 11, Nobunaga no Yabou Online or other PS-BBN download software might not work then.

installing the hdd-osd to any non JAP/US ps2:

note:this will work with either SONY-HDD's, or standart PC-HDD's if you have a modchip with
ATAD patching.

1. extract hackchips bb-navigator disc.

2. burn that iso to DVD.

3. check that ule's "disc control" function is turned on, put in a original DVD game and do a swap trick to change it with the hackchip bb-navigator disc.

4. go to the root of the dvd with the ule filebrowser.

5. execute the "HD_UTILI.ELF", when the elf is loaded, click on install hdd-software.

6. extract the "ps2_mbr_installer" and put it on a usb drive, copy the "mbr 032" from the "already_patched_PSBBN_FILES.rar" into the MBR installer folder, rename it to "MBR.KELF",
plug the usb drive in your ps2, boot up ule, and bootup "FIXMBR.elf" from the usb drive, it will install the patched mbr.

7. after that is done, start up the "hacked-ule"
go to filebrowser and copy the hosdsys.elf from the "already patched_HOSDSYS_FILE.rar" to "__system/osd100"

8. pull out the fmcb memory card (if you have one) restart your ps2 and the HDD should appear in the browser.

Alternate: but if you do not have a SONY-HDD or ATAD-PAtching modchip, but you still want
to use the hdd-osd to launch homebrew but keep in mind games with hdd support wont work
with this, like ffxi, they still need a original sony-hdd or a atad -patching modchip, then
use the following here, a readme file for propper use is included:
http://www.mediafire.com/download.php?uqkzy5m4kammdm4



installing the bb-navigator to any non JAP ps2:

note: i have been told from l_oliviera that PSBBN will not work with ATAD patching modchips, you need a SONY-HDD for it to work.
i cant verify that because i use a SONY-HDD, and don't have a modchip.


1. extract hackchips bb_navigator disc.

2. burn that iso to DVD.

3. check that ule's "disc control" function is turned on, put in a original DVD game and do a swap trick to change it with the hackchip bb-navigator disc.

4. go to the root of the dvd with the ule filebrowser.

5. execute the "BBNAV_NT.ELF" or "BBNAV_PA.ELF", when the elf is loaded, click on the third entry "PlayStationBB Navigator(no insuto-ru)" to install.
note: it will require you to have ~14GB of free space on your hdd.

6. extract the "ps2_mbr_installer" and put it on a usb drive, copy the "mbr" from the "already_patched_HOSDSYS_FILES_US.rar" into the MBR installer folder, rename it to "MBR.KELF",
plug it in your ps2, boot up ule, and bootup "FIXMBR.elf" from the usb drive, it will install the patched mbr.

7. after that is done, start up the "hacked-ule"
go to filebrowser and copy the "osdboot.elf" from the "already patched_PSBBN_FILES.rar" to "__system/p2lboot"

8. pull out the fmcb memory card (if you have one) restart your ps2 and it should boot directly into PSBBN, and have fun exploring the last PSBBN channel left "Koei Tecmo Games".

Files:
http://www.mediafire.com/?0vstzhhkgpd86

MBR installer:
http://www.mediafire.com/download.php?nuey2zda7d8ak2l


here the tutorial in txt file form:
http://www.mediafire.com/view/?jq9debn5y5maksw

p.s. thanks for the handy tool "MBR-installer"

Submit "Install PSBBN/HDD-OSD on other Region PS2 Consoles.(update 2)" to Digg Submit "Install PSBBN/HDD-OSD on other Region PS2 Consoles.(update 2)" to del.icio.us Submit "Install PSBBN/HDD-OSD on other Region PS2 Consoles.(update 2)" to StumbleUpon Submit "Install PSBBN/HDD-OSD on other Region PS2 Consoles.(update 2)" to Google

Updated 07-24-2012 at 06:10 AM by richi902

Categories
Uncategorized

Comments

Page 2 of 2 FirstFirst 12
  1. Kensou's Avatar
    If anyone's interested, you can replace the Files in either the FILE1 or FILES folders with say the files of the Japanese HDD 1.0 Utility disc or another version of BB Nav if you want. This might only be useful if you have a Japanese system and don't want BB Nav, or if you want an older version than 0.32, I believe BB Nav 0.31 and older has support for NetMD that was stripped on 0.32.
  2. Segment_Fault's Avatar
    Quote Originally Posted by Lex
    Trying to install HDD-OSD, never worked with WinHex, stil stuck.
    Try installing the HDD-OSD with this disc, then skip the MBR hexediting step.
  3. vitas155's Avatar
    've tried just does not load
  4. Lex's Avatar
    "PSBBN 0.31 just seems to be updated to prevent patching so that a modchip and a Linux Kit cannot run the program without an official HDD or on a foreign PS2, as was possible with earlier versions." - Jeffrey McDonald

    So does someone tried psbbn 0.30?
  5. richi902's Avatar
    as long as it has the same MBR, and "osdboot.elf" it "could" work, but i guess it wont because the older ones used a different booting method.
    , but then again that could be only the 0.10 and 0.20, cant remember anymore.
  6. Lex's Avatar
    as it sais its only patched, so I guess not. Looking at the pictures of installations 0.30, 0.31 and 0.32 are the same. I cant find a disk.
  7. br222's Avatar
    hi richie you said " copy the "mbr 032" to sector 8224 of your harddrive with a hex editor" just found the line 8224 and paste and copy?
    I never use hex editor i try tonight see you.
  8. richi902's Avatar
    i have updated the guide with new instructions for the new "mbr installer tool"
  9. br222's Avatar
    ok i chek the new method
    stay tuned
  10. br222's Avatar
    mmm oh i forget this "ATAD patching" i can't configured my modchip;;; so if i use winhex for replace MBR i need ATAD patch in my HDD to?
  11. richi902's Avatar
    if you dont use a "sony hdd" then you need a modchip with atad patching to run the hdd-osd or ps-bbn,
    if you dont have any of the 2, you can still configure FMCB to auto boot the decrypted hdd-osd(which is ATAD patched) from a memory card.
    keep in mind, using this method will not allow you to use official hdd compatible software, like Final Fantasy 11 or other games with a "install feature".
    it will still allow you to use "bootable partitions" for homebrew or the upcoming mini-opl, which will allow you to boot games directly from the browser/game-channel.
    i might write up a tutorial about that soon anyway, for the currently public available version, which is installable via kermit.
  12. br222's Avatar
    yes yes i don't have modchip, but i use "vitas200's" tutorial whit hddraw copy and success,
    but I have to succeed with your tutorial, for bootable partitions.

    Now i try install icon via winex. thanks for help.
  13. vitas155's Avatar
    Quote Originally Posted by br222
    yes yes i don't have modchip, but i use "vitas200's" tutorial whit hddraw copy and success
    you found this instruction on pspx.ru?this instruction is made by me on the basis of works of other hacker, the original instruction is on my site, I updated recently dump, now UlaunchELF there are preset and OPL 0.8.HDD OSD is started by the first and from it it is possible to start the listed applications plus some PS1 games, besides we practically finished transfer, I plan to make new video soon
  14. br222's Avatar
    hi vitas200, yes i found it in your site, cleary tutorial the method whit copy image disk work finally in my no sony hdd....
    but now i want create bootable partitions.
  15. lilkuz2005's Avatar
    i just upgraded my old 80gb WD IDE hdd to a 200gb seagate IDE, im having issues with getting the hdd to show up in the browser, i have used the hdd utility disk to format and install the hdd software and i have fallowed the tutorial to a T, is this even possible with larger hard drives ?

    EDIT...
    i have it installed and working on my 200gb hdd, unfortunately there is only 128gb of the 200gb usable. i hope this can be patched in the future so we can use larger hard drives with this amazing hack. i may bring out my old 80gb hdd just for testing this with and wait for larger drive support before i use it on my main drive, keep up the good work guys, this will be awesome when its polished
    Updated 01-06-2013 at 03:52 AM by lilkuz2005
  16. krHACKen's Avatar
    Quote Originally Posted by lilkuz2005
    i hope this can be patched in the future so we can use larger hard drives with this amazing hack.
    Try installing this MBR KELF with FIXMBR.elf after installing the HDD Software. Hope it works. I didn't try to launch the LBA48 patched hosdsys from the MBR but I suppose it should be fine...

    EDIT
    Quote Originally Posted by Segment_Fault
    Try installing the HDD-OSD with this disc, then skip the MBR hexediting step.
    Dude, please do not direct link to my Mediafire folders. BTW, SUDC1 was crap.
    Updated 01-07-2013 at 07:14 PM by krHACKen (To Seg)
  17. lilkuz2005's Avatar
    [QUOTE=krHACKen;bt660]Try installing this MBR KELF with FIXMBR.elf after installing the HDD Software. Hope it works. I didn't try to launch the LBA48 patched hosdsys from the MBR but I suppose it should be fine...

    thanks krHACKen, that MBR.KELF worked, i now can use 188gb of my 200gb hdd, i know this is the full amount after the ps2 formats the drive because thats all i could use in hdloader, thanks so much for the help
  18. Fisher's Avatar
    Is it possible to install on a PS2 with a dead laser? How?
Page 2 of 2 FirstFirst 12