Physically Smaller SD Cards?

[HappehLemons]

Hey guys, I just got my everdrive and was wondering if there's any card that will fit into it that is small enough to fit into a N64 shell without modification? I don't really plan to take the SD card out, so I just wanted to close it up on a N64 shell.

Thanks for any help.

[DefectX11]

AFAIK half-height SD cards don't exist- it would be basically incompatible with everything, because if it's a push to eject, it'll get stuck inside, and if it's a pull to eject then you won't be able to pull it out.

Maybe open it up and move the SD card slot down a tad further? Shouldn't be too hard to de-solder it and move it to a better place.

EDIT- remove SD card reader, and solder this on. That way you can place the reader anywhere you want, and it's sort of pre-built.
http://www.ebay.ca/itm/SD-card-SD-Card-Extension-Extender-Cable-SDHC-32gb-Compatible-GPS-TV-/170867685697?pt=AU_Digital_Memory_Card_Readers_Ada ptors&hash=item27c881f941#ht_2777wt_1156

[Bad_Ad84]

RS-MMC

[DefectX11]

Well, would ya look at that- they exist.

[KRIKzz]

rs-mmc will not work with ed64-v2

[Bad_Ad84]

In that case, find one of the sd cards that actually only fills half the space and cut it in half.

Theres a thread about it in this very forum

[l_oliveira]

In that case, find one of the sd cards that actually only fills half the space and cut it in half.

Theres a thread about it in this very forum

Some SANDISK cards have a single chip solution which is just that. And some models are transparent, which allow you to not destroy it by seeing where you can safely cut. :)

[HappehLemons]

Could I get something like this and desodder the USB stick off?
http://www.ebay.com/itm/SanDisk-2GB-2-GB-Ultra-II-SD-Plus-USB-Card-Class-4-/250815089423?pt=Digital_Camera_Memory_Cards&hash=item3a65be8b0f

[gray.fullbusterzzz]

This might help http://www.assemblergames.com/forums/showthread.php?37266-Small-micro-sd-card-adaptor

[brendand]

micro SD ?

[derekb]

still wish micro sd wouldve won the vote back when krikzz asked what he should put on the ed64

[StoneAgeGamer]

still wish micro sd wouldve won the vote back when krikzz asked what he should put on the ed64

Well there is a reason it lost. Most people are not interested in taking their cart apart to load ROMs onto it.

I like the Mega EverDrive approach. If he ever redoes ED64 PCB he should see if he can fit microSD and regular SD.

[derekb]

As I stated in the vote thread, how often does the romset ever really update at this point if you just buy a decent size card? The whole 'I may need to load new roms' argument didn't really vibe with me at all. I agree with your post